Vessel |
Total Volume |
3 |
5 |
7 |
10 |
Working Vol. |
2 |
3 |
5 |
7 |
Head Plate |
thermowell, aeration, sampling, spare ports
pH, DO and foam probe ports
4 feeding ports and 2 general purpose ports |
Vessel |
Single wall bottom heating |
Aeration |
Flow rate |
0~5 LPM |
Sparger |
Removable ring sparger |
Inlet Filter |
0.2μm filter interchangeable |
Air Pump |
Diaphragm pump |
Condenser |
Water cooled condenser |
Air flow meter |
0~5LPM, vertical type |
Agitation |
Servo Motor |
Top drive DC motor 60W(100W option)
Magnetic Hall sensor, PWM control |
Impellers |
2-rushton turbine impellers, 1 foam breaker |
Indication |
LCD display in 10 rpm increments |
Temperature
Controller |
Control range |
3oC above ambient temperature to 80oC |
Accuracy |
±0.1 oC |
Sensor |
RTD(Pt-100) |
Control Algorithm |
PID |
Heating |
200 Watt heater |
Cooling |
Air fan and fin for air cooling and
Solenoid valve for water cooling |
Interface |
RS232-C |
Output Signal |
0 to 5V analog signal for data recorder |
pH controller |
Probe |
Mettle-Toledo pH: 2.0~12.0 |
Calibration method |
(4,7), (4,7,10), (7,10) and manual adjust |
Measuring |
pH 0.01 resolution |
Control |
Digital PWM, pH 0.1 accuracy |
Peristaltic pump |
2- Watson-Marlow 102R peristaltic pump |
DO
controller |
Set point Range |
0~200% |
Display Range |
0~200% |
Control Mode |
PID |
Resolution |
0.1 |
Accessory |
4 reagent bottle, Reagent bottle holder |
Power |
110~220Volt/50~60Hz |
Dimension |
D´W´H(mm) |
450´250´670 |
Weight |
Kg |
100 |